This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1729242226 | 3.66 VDC | 3.96 VDC | 0 | 0 | 0 |
1729241326 | 3.69 VDC | 4.12 VDC | 0 | 0 | 0 |
1729240426 | 3.7 VDC | 3.96 VDC | 0 | 0 | 0 |
1729239526 | 3.66 VDC | 4.16 VDC | 0 | 0 | 0 |
1729189278 | 3.58 VDC | 1.54 VDC | 0 | 0 | 0 |
1729188377 | 3.55 VDC | 1.48 VDC | 0 | 0 | 0 |
1729187477 | 3.61 VDC | 1.56 VDC | 0 | 0 | 0 |
1729186577 | 3.62 VDC | 1.56 VDC | 0 | 0 | 0 |
1729185677 | 3.63 VDC | 1.6 VDC | 0 | 0 | 0 |
1729183877 | 3.64 VDC | 1.56 VDC | 0 | 0 | 0 |
1729182976 | 3.65 VDC | 1.58 VDC | 0 | 0 | 0 |
1729182076 | 3.65 VDC | 1.56 VDC | 0 | 0 | 0 |
1729181176 | 3.66 VDC | 1.6 VDC | 0 | 0 | 0 |
1729180276 | 3.67 VDC | 1.62 VDC | 0 | 0 | 0 |
1729179376 | 3.68 VDC | 1.58 VDC | 0 | 0 | 0 |
1729178476 | 3.68 VDC | 3.66 VDC | 0 | 0 | 0 |
1729177576 | 3.69 VDC | 3.98 VDC | 0 | 0 | 0 |
1729176676 | 3.69 VDC | 4.02 VDC | 0 | 0 | 0 |
1729175776 | 3.71 VDC | 4.06 VDC | 0 | 0 | 0 |
1729173976 | 3.68 VDC | 4.04 VDC | 0 | 0 | 0 |
1729173076 | 3.74 VDC | 4.22 VDC | 0 | 0 | 0 |
1729172175 | 3.74 VDC | 4.2 VDC | 0 | 0 | 0 |
1729171275 | 3.75 VDC | 4.16 VDC | 0 | 0 | 0 |
1729170375 | 3.83 VDC | 4.3 VDC | 0 | 0 | 0 |
1729169475 | 3.94 VDC | 4.62 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)