This is the latest recevied telemetry packets stored in our database for station/object YO6LRV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1777595607 | 12.92 VDC | 0 | 0 | 0 | 0 |
| 1777594707 | 13 VDC | 0 | 0 | 0 | 0 |
| 1777593808 | 12.96 VDC | 0 | 0 | 0 | 0 |
| 1777592907 | 12.98 VDC | 0 | 0 | 0 | 0 |
| 1777592007 | 13 VDC | 0 | 0 | 0 | 0 |
| 1777591107 | 13 VDC | 0 | 0 | 0 | 0 |
| 1777590207 | 13 VDC | 0 | 0 | 0 | 0 |
| 1777589307 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1777588407 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1777587507 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1777586607 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1777585706 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1777584806 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1777583906 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1777583006 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1777582106 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1777581206 | 13.04 VDC | 0 | 0 | 0 | 0 |
| 1777580306 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1777579406 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1777578506 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1777577606 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1777576705 | 13.16 VDC | 0 | 0 | 0 | 0 |
| 1777575807 | 13.18 VDC | 0 | 0 | 0 | 0 |
| 1777574907 | 13.1 VDC | 0 | 0 | 0 | 0 |
| 1777574007 | 13.1 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)