This is the latest recevied telemetry packets stored in our database for station/object SR2BBY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795350790 | 0 Count | 409 Count | 0 Count | 0 VDC | 0 VDC |
| 1795350722 | 0 Count | 408 Count | 0 Count | 0 VDC | 0 VDC |
| 1795350568 | 0 Count | 404 Count | 0 Count | 0 VDC | 0 VDC |
| 1795348768 | 0 Count | 377 Count | 0 Count | 0 VDC | 0 VDC |
| 1795346968 | 0 Count | 375 Count | 0 Count | 0 VDC | 0 VDC |
| 1795345168 | 0 Count | 373 Count | 0 Count | 0 VDC | 0 VDC |
| 1795343367 | 0 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
| 1795341567 | 0 Count | 359 Count | 0 Count | 0 VDC | 0 VDC |
| 1795339767 | 0 Count | 343 Count | 0 Count | 0 VDC | 0 VDC |
| 1795337967 | 0 Count | 328 Count | 0 Count | 0 VDC | 0 VDC |
| 1795336167 | 0 Count | 311 Count | 0 Count | 0 VDC | 0 VDC |
| 1795334366 | 0 Count | 293 Count | 0 Count | 0 VDC | 0 VDC |
| 1795332566 | 0 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1795330766 | 0 Count | 257 Count | 0 Count | 0 VDC | 0 VDC |
| 1795328970 | 0 Count | 233 Count | 0 Count | 0 VDC | 0 VDC |
| 1795327169 | 0 Count | 206 Count | 0 Count | 0 VDC | 0 VDC |
| 1795325369 | 0 Count | 186 Count | 0 Count | 0 VDC | 0 VDC |
| 1795323569 | 0 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1795321769 | 0 Count | 141 Count | 0 Count | 0 VDC | 0 VDC |
| 1795319968 | 0 Count | 118 Count | 0 Count | 0 VDC | 0 VDC |
| 1795318168 | 0 Count | 98 Count | 0 Count | 0 VDC | 0 VDC |
| 1795316368 | 0 Count | 80 Count | 0 Count | 0 VDC | 0 VDC |
| 1795314568 | 0 Count | 58 Count | 0 Count | 0 VDC | 0 VDC |
| 1795312767 | 0 Count | 41 Count | 0 Count | 0 VDC | 0 VDC |
| 1795310966 | 0 Count | 21 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)