This is the latest recevied telemetry packets stored in our database for station/object SP8AA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780231657 | 149 Count | 619 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1780231475 | 148 Count | 617 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1780231292 | 147 Count | 615 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1780231109 | 146 Count | 613 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1780230926 | 145 Count | 611 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1780230743 | 144 Count | 609 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1780230560 | 143 Count | 607 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1780230377 | 142 Count | 605 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1780230195 | 141 Count | 603 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1780230012 | 140 Count | 601 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1780229829 | 139 Count | 599 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1780229646 | 138 Count | 597 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1780229463 | 137 Count | 595 Count | 0 Count | 4.34 VDC | 0.14 VDC |
| 1780229282 | 136 Count | 593 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1780229098 | 135 Count | 591 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1780228916 | 134 Count | 589 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1780228733 | 133 Count | 587 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1780228549 | 132 Count | 585 Count | 0 Count | 4.34 VDC | 0.14 VDC |
| 1780228366 | 131 Count | 583 Count | 0 Count | 4.35 VDC | 0.14 VDC |
| 1780228184 | 130 Count | 581 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1780228000 | 129 Count | 579 Count | 0 Count | 4.34 VDC | 0.14 VDC |
| 1780227817 | 128 Count | 577 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1780227635 | 127 Count | 575 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1780227452 | 126 Count | 573 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1780227269 | 125 Count | 571 Count | 0 Count | 4.32 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)