EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SQ2PDS-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2PDS-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1793189172	68 Count	548 Count	46 Count
1793187371	64 Count	523 Count	43 Count
1793185570	60 Count	479 Count	40 Count
1793183769	54 Count	434 Count	35 Count
1793181968	47 Count	377 Count	29 Count
1793178366	41 Count	308 Count	25 Count
1793174343	30 Count	202 Count	21 Count
1793172542	27 Count	174 Count	19 Count
1793170741	17 Count	133 Count	10 Count
1793168940	12 Count	85 Count	6 Count
1793167139	9 Count	58 Count	4 Count
1793165347	2 Count	29 Count	2 Count
1793163546	122 Count	1020 Count	87 Count
1793161746	118 Count	995 Count	84 Count
1793159945	115 Count	967 Count	82 Count
1793158144	112 Count	939 Count	80 Count
1793156343	109 Count	913 Count	78 Count
1793154542	106 Count	887 Count	76 Count
1793152742	102 Count	854 Count	73 Count
1793150941	99 Count	828 Count	71 Count
1793149140	92 Count	798 Count	65 Count
1793147339	89 Count	771 Count	63 Count
1793145538	86 Count	743 Count	61 Count
1793143749	78 Count	713 Count	58 Count
1793141948	75 Count	688 Count	56 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)