This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789246543 | 0 Count | 638 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789245643 | 0 Count | 636 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789244743 | 0 Count | 625 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1789243843 | 0 Count | 616 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1789242943 | 0 Count | 610 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1789242043 | 0 Count | 606 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789240243 | 0 Count | 597 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789239343 | 0 Count | 594 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1789238443 | 0 Count | 589 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1789237543 | 0 Count | 582 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1789236642 | 0 Count | 580 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789235742 | 0 Count | 577 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1789234842 | 0 Count | 572 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1789233942 | 0 Count | 569 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1789233042 | 0 Count | 568 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1789232142 | 0 Count | 566 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1789231242 | 0 Count | 562 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789230342 | 0 Count | 559 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1789229442 | 0 Count | 554 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1789228542 | 0 Count | 521 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1789227642 | 0 Count | 450 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1789225841 | 0 Count | 401 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1789224941 | 0 Count | 379 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1789224041 | 0 Count | 357 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1789223141 | 0 Count | 338 Count | 0 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)