This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768147593 | 0 Count | 327 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1768146693 | 0 Count | 324 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1768145792 | 0 Count | 317 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1768144892 | 0 Count | 314 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1768143992 | 0 Count | 311 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1768143092 | 0 Count | 306 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1768140392 | 0 Count | 290 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1768139492 | 0 Count | 287 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1768138592 | 0 Count | 283 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1768137692 | 0 Count | 279 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1768136791 | 0 Count | 276 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1768135891 | 0 Count | 271 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1768134991 | 0 Count | 267 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1768134091 | 0 Count | 260 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1768133191 | 0 Count | 257 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1768132291 | 0 Count | 250 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1768131391 | 0 Count | 242 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1768130491 | 0 Count | 236 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1768129591 | 0 Count | 228 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1768128691 | 0 Count | 223 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1768127790 | 0 Count | 221 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1768125990 | 0 Count | 212 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1768125090 | 0 Count | 204 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1768124190 | 0 Count | 195 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1768123290 | 0 Count | 188 Count | 0 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)