This is the latest recevied telemetry packets stored in our database for station/object TA0P-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1793188516 | 4.42 VDC | 27.4 C | 52.38 % | 0 | 0 |
| 1793188474 | 4.38 VDC | 27.4 C | 52.52 % | 0 | 0 |
| 1793188457 | 4.44 VDC | 27.4 C | 52.52 % | 0 | 0 |
| 1793188436 | 4.44 VDC | 27.3 C | 52.43 % | 0 | 0 |
| 1793188389 | 4.38 VDC | 27.3 C | 52.72 % | 0 | 0 |
| 1793188364 | 4.44 VDC | 27.3 C | 52.72 % | 0 | 0 |
| 1793188319 | 4.38 VDC | 27.3 C | 52.79 % | 0 | 0 |
| 1793188300 | 4.44 VDC | 27.3 C | 52.79 % | 0 | 0 |
| 1793188261 | 4.44 VDC | 27.2 C | 52.67 % | 0 | 0 |
| 1793188220 | 4.44 VDC | 27.2 C | 52.67 % | 0 | 0 |
| 1793188196 | 4.44 VDC | 27.1 C | 52.44 % | 0 | 0 |
| 1793188161 | 4.44 VDC | 27.1 C | 52.44 % | 0 | 0 |
| 1793188136 | 4.38 VDC | 27.1 C | 52.35 % | 0 | 0 |
| 1793188117 | 4.44 VDC | 27.1 C | 52.35 % | 0 | 0 |
| 1793188101 | 4.44 VDC | 27.1 C | 52.35 % | 0 | 0 |
| 1793188055 | 4.38 VDC | 27 C | 52.26 % | 0 | 0 |
| 1793188019 | 4.42 VDC | 26.9 C | 52.01 % | 0 | 0 |
| 1793187995 | 4.42 VDC | 26.9 C | 52.01 % | 0 | 0 |
| 1793187972 | 4.38 VDC | 26.9 C | 52.01 % | 0 | 0 |
| 1793187955 | 4.42 VDC | 26.9 C | 51.71 % | 0 | 0 |
| 1793187938 | 4.42 VDC | 26.9 C | 51.71 % | 0 | 0 |
| 1793187919 | 4.44 VDC | 26.9 C | 51.71 % | 0 | 0 |
| 1793187890 | 4.42 VDC | 26.8 C | 52.03 % | 0 | 0 |
| 1793187873 | 4.42 VDC | 26.8 C | 52.03 % | 0 | 0 |
| 1793187816 | 4.44 VDC | 26.7 C | 52.52 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)