EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SQ2PDS-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2PDS-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1792829004	125 Count	1019 Count	91 Count
1792827203	118 Count	974 Count	85 Count
1792825402	115 Count	938 Count	83 Count
1792823602	109 Count	901 Count	78 Count
1792820000	102 Count	835 Count	73 Count
1792816398	96 Count	762 Count	69 Count
1792814607	89 Count	729 Count	67 Count
1792812806	85 Count	697 Count	64 Count
1792811005	82 Count	662 Count	62 Count
1792809204	79 Count	628 Count	60 Count
1792807404	76 Count	592 Count	58 Count
1792805603	73 Count	559 Count	56 Count
1792803802	69 Count	523 Count	53 Count
1792802001	62 Count	483 Count	47 Count
1792800200	58 Count	447 Count	44 Count
1792798400	56 Count	413 Count	43 Count
1792796599	52 Count	368 Count	40 Count
1792793005	41 Count	302 Count	35 Count
1792791204	39 Count	270 Count	34 Count
1792789403	36 Count	231 Count	32 Count
1792787603	34 Count	199 Count	31 Count
1792785802	29 Count	162 Count	27 Count
1792784001	27 Count	129 Count	26 Count
1792782200	23 Count	77 Count	23 Count
1792780399	114 Count	1001 Count	87 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)