This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773733697 | 126 Count | 738 Count | 0 Count | 4.06 VDC | 4.36 VDC |
| 1773731897 | 124 Count | 732 Count | 0 Count | 4.06 VDC | 4.36 VDC |
| 1773730098 | 122 Count | 704 Count | 0 Count | 4.06 VDC | 4.36 VDC |
| 1773728296 | 120 Count | 698 Count | 0 Count | 4.06 VDC | 4.36 VDC |
| 1773726496 | 118 Count | 692 Count | 0 Count | 4.06 VDC | 1.58 VDC |
| 1773724696 | 116 Count | 683 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773722896 | 114 Count | 674 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773721087 | 107 Count | 666 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773719288 | 105 Count | 657 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773717490 | 103 Count | 647 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773715690 | 101 Count | 637 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773713892 | 99 Count | 627 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773712092 | 97 Count | 613 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773710293 | 95 Count | 604 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773708494 | 93 Count | 590 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773706694 | 91 Count | 581 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773704896 | 89 Count | 571 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773703096 | 87 Count | 560 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773701297 | 85 Count | 549 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773699487 | 78 Count | 540 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773697687 | 76 Count | 529 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773695888 | 74 Count | 518 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773694089 | 72 Count | 507 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773692289 | 70 Count | 497 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1773690490 | 68 Count | 481 Count | 0 Count | 4.06 VDC | 1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)