This is the latest recevied telemetry packets stored in our database for station/object CE4ERM-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790207036 | 14.5 C | 50.51 % | 1017.13 hPa | 0 | 0 |
| 1790206132 | 15.1 C | 48.69 % | 1020.5 hPa | 0 | 0 |
| 1790204324 | 20.5 C | 38.25 % | 1020.25 hPa | 0 | 0 |
| 1790203421 | 20.5 C | 42.22 % | 1019.5 hPa | 0 | 0 |
| 1790203296 | 20.2 C | 41.27 % | 1018.63 hPa | 0 | 0 |
| 1790200799 | 23.2 C | 33.91 % | 1020.5 hPa | 0 | 0 |
| 1790200427 | 22.9 C | 33.71 % | 1018.88 hPa | 0 | 0 |
| 1790200303 | 22.8 C | 35.82 % | 1020.13 hPa | 0 | 0 |
| 1790200179 | 22.5 C | 36.75 % | 1020 hPa | 0 | 0 |
| 1790199931 | 22.4 C | 42.92 % | 1018.88 hPa | 0 | 0 |
| 1790199807 | 22.6 C | 37.98 % | 1019.13 hPa | 0 | 0 |
| 1790195897 | 19.6 C | 31.1 % | 1019 hPa | 0 | 0 |
| 1790194977 | 21 C | 33.19 % | 1019 hPa | 0 | 0 |
| 1790194073 | 22.2 C | 30.12 % | 1018.75 hPa | 0 | 0 |
| 1790193949 | 22.5 C | 29.59 % | 1019.75 hPa | 0 | 0 |
| 1790193335 | 22.3 C | 36.73 % | 1019.25 hPa | 0 | 0 |
| 1790193081 | 20 C | 31.58 % | 1020.5 hPa | 0 | 0 |
| 1790187484 | 22.2 C | 31.75 % | 1021 hPa | 0 | 0 |
| 1790187112 | 21.2 C | 31.54 % | 1019.38 hPa | 0 | 0 |
| 1790186982 | 21.3 C | 31.28 % | 1019.88 hPa | 0 | 0 |
| 1790186740 | 22.1 C | 31.52 % | 1020.25 hPa | 0 | 0 |
| 1790186244 | 22.3 C | 29.58 % | 1018.25 hPa | 0 | 0 |
| 1790184317 | 27.4 C | 27.73 % | 1019.63 hPa | 0 | 0 |
| 1790183413 | 25.9 C | 28.69 % | 1019.75 hPa | 0 | 0 |
| 1790182509 | 23 C | 30.11 % | 1020.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)